There are many solo options in SAC... your solo switches should not normally affect other output chans so you are free to solo anywhere without affecting FOH or monitor outputs if the options are used as designed.

You should not be using the Solo In Place option if you are using the console as a live console... that option is only useful in a studio environment.

Read the solo option details in the helpfile Navigation/Main View and also the solo options in the Mixer menu near the bottom.

You should be using a Pre or Post solo mode or one of the combined modes.

When you press a solo button the signal will be routed to your chosen outputs for FOH operator as well as the MON operator.

You can also press the main solo lite at the top of the main window to monitor the master output of the current mixer and this will chase as you switch to a different mixer and is specifically designed to allow you to instantly hear any mixers mix and make adjustments.

Bob L

Mike Bizanovich wrote:I am running a monitor mix as the audio source for a video stream. I would like to be able to solo a channel or multiple channels on my remote computer for the appropriate monitor mix. I***8217;ve tried every setting I can think of. When I solo a channel, the FOH and all other monitor mixers mute out. I have the solo output device set appropriately. Right now I am having to mute everything but what I want to monitor.

Hi Mike,

I'm not understanding the question. You say when you solo a channel the FOH and all other monitor mixers mute out and that you are muting everything but what you want to monitor.

What are you expecting to happen? How are you monitoring the FOH/Monitor mixes if they are not Soloed?

There shouldn't be any audio running through your solo bus except for channels that are actively being soloed.

Mike Bizanovich wrote:I am running a monitor mix as the audio source for a video stream. I would like to be able to solo a channel or multiple channels on my remote computer for the appropriate monitor mix. I***8217;ve tried every setting I can think of. When I solo a channel, the FOH and all other monitor mixers mute out. I have the solo output device set appropriately. Right now I am having to mute everything but what I want to monitor.

Would still love to know if this is possible.

TomyN wrote:In MIXER -> SOLO MODE checke the SOLO IN PLACE setting (at the bottom of the menu)

Did that. Same result.

In MIXER -> SOLO MODE checke the SOLO IN PLACE setting (at the bottom of the menu)

Bob L wrote:If you click the solo master switch at the top of interface, the current mixer master is soloed... as you switch to a different mixer the solo live chases... so you can instantly solo any mixer master output and hear what each mix sound like and make adjustments.

Bob L

I am running a monitor mix as the audio source for a video stream. I would like to be able to solo a channel or multiple channels on my remote computer for the appropriate monitor mix. I’ve tried every setting I can think of. When I solo a channel, the FOH and all other monitor mixers mute out. I have the solo output device set appropriately. Right now I am having to mute everything but what I want to monitor.

The MON solo bus is only available when there is a remote connected... otherwise only the FOH solo bus is active.

Bob L

Hi Dell --

Currently using Sac 64 demo.
Optiplex XE2 (I7-4770s)
16G ram
404HD USB (for testing purposes) Coming soon: Older RME PCI cards
Apogee Ensemble (stand alone) and Profire 2626
Optimized with Bob and Marten's suggestions.

Thanks!

mr_es335 wrote:Nicholas,

May I ask some software/hardware-related questions?

For example:
System: Desktop | Laptop
OS:
SAC version:

Any other info would be helpful.

If you have not yet seen these videos, please do so...absolutely wonderful!! [Click_Me]

• These videos may be particularly helpful for newbies!

Hi everyone,

All is working great although I'm having a bit of trouble with the "SOLO FX" for the MON bus.
Works great when assigning FX to the FOH solo bus, but I don't seem to be getting any signal with the MON Solo FX.
I'm sure it's operator error on my behalf. Thanks for any help!

p.s. I've tried to update my profile info here, yet could also use some guidance on how to create a "signature" for my posts here.

Thanks!

Bob L wrote:If you click the solo master switch at the top of interface, the current mixer master is soloed... as you switch to a different mixer the solo live chases... so you can instantly solo any mixer master output and hear what each mix sound like and make adjustments.

Bob L

Excellent. Super easy. Thank you, Bob! Great software!

If you click the solo master switch at the top of interface, the current mixer master is soloed... as you switch to a different mixer the solo live chases... so you can instantly solo any mixer master output and hear what each mix sound like and make adjustments.

Bob L

Nicholas,

May I ask some software/hardware-related questions?

For example:
System: Desktop | Laptop
OS:
SAC version:

Any other info would be helpful.

If you have not yet seen these videos, please do so...absolutely wonderful!! [Click_Me]

• These videos may be particularly helpful for newbies!

Thank you! Totally missed this in the manual! I'm grateful for the help!

More soon!

there are two solo busses

1. FOH
2. Monitor

You have to set the Monitor Buss to the output channel you want to monitor through. Both FOH and Monitor buss can be routed to the same output channels.

Thank you, Peter!

Do I need to set a preference to do this?
Currently to test I've assigned the solo bus to a specific output which works when I solo anything.
Yet the solo doesn't follow selected monitor mixer choice.

Apologies for the newbie challenges.

Thanks Peter!

Nicholas R wrote:Hi everyone!
Does SAC allow for the MON solo/cue function to follow the selected "monitor mixer"?

Common example is using SAC as the monitor engineer and needing to quickly hear/cue a specific mix (once the specific mix has been chosen) without needing to hit the actual SOLO button on the output bus.

Yes the output to the solo bus follows the selected mix, so if you select a mix that is setup to be a monitor mix, that's what you'll be hearing.

The only little annoyance i find with the SAC solobus and listening to monitor mixes is when you pan the master fader hard left or right to send the mix to only one physical output. When you do that and have the tap point set to "after fader" the sound on the solobus is also panned! To get around that I do the panning with a plugin patched post fader. It's no big deal but it's something to be aware of if you're listening on a wedge and can only hear half of the monitor mixes :-)

Nicholas,

Firstly, "Welcome to the Forum!" We hope that you will enjoy your stay?

Secondly, someone is always available here to assist you.

Thirdly, to answer your questions "Does SAC allow for the MON solo/cue function to follow the selected 'monitor mixer'?"

• As to "How"?...one for the more experienced folk will have to chime-in here.

Again, Nicholas, "Welcome".

PS: If you do plan to "stay on" - and we hope that you do, please ensure that you complete your profile settings, and tell us a little about yourself.

Hi everyone!

First time posting! I'm very interested in SAC's monitor mix capabilities.
I've been working through the demo and have a quick question.

Does SAC allow for the MON solo/cue function to follow the selected "monitor mixer"?

Common example is using SAC as the monitor engineer and needing to quickly hear/cue a specific mix (once the specific mix has been chosen) without needing to hit the actual SOLO button on the output bus.

Thanks for any help!

Great product!