SAC shade

by **IraSeigel** » Wed Sep 24, 2008 5:03 pm

HapHazzard wrote:...

I still have the original SAC scheme too and I like a lot. Still thinkin' of putting LEDs behind the buttons.

...
Hap

LEDs would be nice. But just keep the simple, clean, modern and very readable font.

by **HapHazzard** » Wed Sep 24, 2008 1:45 pm

I could change the color a bit so as to know where you are in the heat of battle. SAW ... SAC

But I'm pretty sure it's obvious what screen your in.

I'm using pipelite_Milano_v02 for SAW so I wanted the same scheme for SAC. Maybe the Mainbar could be bright so as to know you are in SAC.

I still have the original SAC scheme too and I like a lot. Still thinkin' of putting LEDs behind the buttons.

Will on with the Madness.

Hap

by **DominicPerry** » Wed Sep 24, 2008 1:22 pm

Nice. But I would say that, I use Pipenite for SAW.

Thanks a lot,

Dominic

by **IraSeigel** » Wed Sep 24, 2008 1:22 pm

VERY nice! I like the clean, simple font choice for the buttons, and the color scheme.

Ira

by **HapHazzard** » Wed Sep 24, 2008 1:13 pm

Also done!
Main bar and few small items.
No crashing (so far).
Yes I removed the FX buttons and the output assignments and the.......

Hap

by **HapHazzard** » Thu Sep 18, 2008 6:00 am

IraSeigel wrote:Hap, you said you were waiting for Adobe, I think. Are you doing it in Photoshop? Illustrator?

Ira

Both but Paint Shop Pro has been my favorite for many years.

Hap

by **IraSeigel** » Wed Sep 17, 2008 6:28 pm

Hap, you said you were waiting for Adobe, I think. Are you doing it in Photoshop? Illustrator?

Ira

by **HapHazzard** » Wed Sep 17, 2008 11:57 am

I'm SLOWLY transferring pipelite_Milano_v02 into SAC 1.1
One plate at a time. A little bit of some resizing the faders and buttons.

FOH only. Monitors later

So far no crashes, it looks pretty good and the mapping seems to be working.

Now I know as Bob gets closer to finishing to a final version (pretty close if not there already), he'll be cleaning up the graphics and I'll have to start over again. But that's OK

. Just having some fun and remember to backup the SAC graphics file!

Hap
PS Was a new plate in 1.0. Wow!

by **HapHazzard** » Wed Sep 17, 2008 7:53 am

HapHazzard wrote:Did you know if danickstr3 is still around somewhere or is tuttifrutti it. I'd like to give it a shot at finishing the wide mixer. Looks like the link to the host is broke. It looked pretty neat in SAC (pre 1.0).

Hap

Never mind

I found it and it is pretty bright!

Hap

by **HapHazzard** » Wed Sep 17, 2008 7:45 am

danickstr wrote:
danickstr3 is the original "tuttifrutti" and is not based on anyone else's work, or I would have credited them. No problem with the confusion, but just wanted to make that clear. It was built file by file in Photoshop from Bob's template. I was trying to make a purely modern version, but I haven't even looked at it for 2 years! It is a bit too purple I think.

Did you know if danickstr3 is still around somewhere or is tuttifrutti it. I'd like to give it a shot at finishing the wide mixer. Looks like the link to the host is broke. It looked pretty neat in SAC (pre 1.0).

Hap

by **IraSeigel** » Sun Sep 07, 2008 9:43 pm

HapHazzard wrote:Bud,

I've been waiting until 1.0 is out. When 1.0 came out, the shade I was fooling around crashed SAC HARD. So don't try a shade that has been modified until Bob gives the OK. Now I am going to give it a try to add lights to the back of active buttons of this version and thats all. Now I know Bob is nowhere near the point of saying it's OK but I got to give it a try anyway.

Hap

Go for it. Keep us posted on your progress. I really liked v0.1 that you posted previously.

Ira

by **HapHazzard** » Sun Sep 07, 2008 9:39 pm

Bud Johnson wrote:Ira,
while he could make progress, no-one can really offer a finished shade till Bob finishes all the features.
The entire edit column, sequence and control tracks to name a few.

edit
Never mind, you just asked for an update. Sorry, I'm tired.

Bud,

I've been waiting until 1.0 is out. When 1.0 came out, the shade I was fooling around crashed SAC HARD. So don't try a shade that has been modified until Bob gives the OK. Now I am going to give it a try to add lights to the back of active buttons of this version and thats all. Now I know Bob is nowhere near the point of saying it's OK but I got to give it a try anyway.

Hap

by **Bud Johnson** » Sun Sep 07, 2008 8:23 pm

Ira,
while he could make progress, no-one can really offer a finished shade till Bob finishes all the features.
The entire edit column, sequence and control tracks to name a few.

edit
Never mind, you just asked for an update. Sorry, I'm tired.

by **IraSeigel** » Sun Sep 07, 2008 8:03 pm

Hey, a while back you'd started on a shade. I liked what you'd posted back then. Any progress, now that Bob's made a final release? Care to share?

Thanks,
Ira

by **ambler** » Sun Aug 03, 2008 7:39 pm

Hey Danickstr, I didn't mean to imply that your work wasn't completely original. I probably should have used a different word but I'm not sure what would be best. I just meant that the parts of the shade that you didn't make original graphics for, i.e. the wide mixer, were using pipenite graphics. I do understand that all the graphics you did were completely original and I apologise for any confusion.

Anyway it's good to hear from you again. If you ever get motivated enough it would be great to see another version.

Mark

by **danickstr** » Sun Aug 03, 2008 12:40 pm

ambler wrote: danickstr made 'TuttiFrutti' (all versions). He used my 'Pipenite' shade as a base for this and didn't do the wide mixer. So the wide mixer is Pipenite the rest is TuttiFrutti.

I don't know if danickstr is still around, I haven't seen any posts from him in quite a while.

Mark

Hey Mark

danickstr3 is the original "tuttifrutti" and is not based on anyone else's work, or I would have credited them. No problem with the confusion, but just wanted to make that clear. It was built file by file in Photoshop from Bob's template. I was trying to make a purely modern version, but I haven't even looked at it for 2 years! It is a bit too purple I think.

I really like pipenite BTW!

I doubt I will finish it, since it is fine for lite users, and I am on a mac now. I might tone down some of the bright purple, if I ever feel motivated, but again I am on a mac, so it won't be easy.

Glad to see it is still hosted, thanks hosters.

by **Iain Westland** » Fri Apr 04, 2008 2:12 pm

i should be able to help with hosting for a bit

by **HapHazzard** » Fri Apr 04, 2008 11:53 am

IraSeigel wrote:Hello Hap,
Your additions to your SAC shade look great. Is it available anywhere to download, or is it a private project as yet?

Thanks,
Ira

Howdy all,
Right now it's private project and I'm open for tweeks on the lights. But as a finished project, it still has a ways to go. It's about 17 mg in size so my service won't hold the file, but I'll be asking around for a host and be back with a link.

Thanks
Hap

by **IraSeigel** » Fri Apr 04, 2008 11:09 am

Hello Hap,
Your additions to your SAC shade look great. Is it available anywhere to download, or is it a private project as yet?

Thanks,
Ira

by **HapHazzard** » Fri Apr 04, 2008 8:53 am

I know it's a little early for this but I added some light behine the buttons.
The image plates were left the same. Just the buttons were reworked.
The FX button I did change a bet just for laughs.

I'll be doing a full rehearsal soon and then I will be able to throw in my two chips on how stable the rig was. In the mean time carry on.

Hap

SAC shade

Post a reply

Expand view Topic review: SAC shade

Re: SAC shade

Re: SAC shade

Re: SAC shade

Re: SAC shade

Re: SAC shade

Re: SAC shade

Re: SAC shade

Re: SAC shade

Re: SAC shade

Re: SAC shade

Re: SAC shade

Re: SAC shade

Re: SAC shade

Re: SAC shade - Question for Hap

Re: SAC shade

Re: SAC shade

Re: SAC shade

Re: SAC shade

Re: SAC shade

Re: SAC shade