SAC Remote - No Meters

[Mike Bizanovich]

I have a strange thing going on. I did a new SAC Remote install on a new Win 10 computer. Everything is working including scenes, however I see no meter activity. Has anyone else run across this one?

[Bob L]

Make sure the Meter Active options in the Mixer menu are checked.

Bob L

[Mike Bizanovich]

Make sure the Meter Active options in the Mixer menu are checked.

Bob L

Came in today and the meters are working. Very strange. Never saw the "Meter Active" menu item before today, but they were enabled. Fluke, I guess. Thanks, Bob.

[Bob L]

There is a reported issue with meters stopping after the engine has been on for more than around 24 hours... stopping and restarting the engine fixes it... I have tried to chase this down, but it is a bit hard to debug when it takes over 24 hours for the issue to appear.

Bob L

[TomyN]

Timestamps/Tick-counts to cotrol repeat - rate for sending VU-Meter data?

[Mike Bizanovich]

There is a reported issue with meters stopping after the engine has been on for more than around 24 hours... stopping and restarting the engine fixes it... I have tried to chase this down, but it is a bit hard to debug when it takes over 24 hours for the issue to appear.

Bob L

Ah, that could be it! I was leaving the engine live testing the new laptop/remote as I was having issues with crashes of the remote. Finally got that sorted out with forced Single-CPU.