Awesome, thanks!

The Mackie MCU Control Universal is the one.... there are a few on Reverb.com for a few hundred bucks at the time of this message.

Bob L

Thanks everyone for the responses, you've all been very helpful. @Dell I am currently going through the manual to het better at working with the keyboard, its the least expensive way to go and I saw some where that its how Bob works, if it works fine for him, I'll put it in some more time to it. @Bob a curious question, does that mean that the Mackie C4 and C4 pro will work fine for channel strip? Thanks all, this has been a fun ride and I'm grateful this support group exists.

The MackieMcu templates work fine with the xTouch, tested with 8 channels and 16 channels.

The Mackie Control units work well with the readout displays and controls for all the mixer parameters.

Bob L

[size=100]Stephen,

Ditto!..Ditto!...Ditto! on what Reujonik stated...
[LIST]
[*][size=100]Stephen, y[/size]ou really...I mean "really"...need to spend some time reading the user manual and seeing what is available for keyboard usage.
[*]Also, please give yourself time in gettng accustomed to such usages...usually 90 days will suffice. Believe me, you will NOT regret this time spent!!
[/LIST]
For what it is worth, check this out...[I]seriously[/I]: [[url=https://fohonline.com/articles/production-profile/elton-john-farewell-yellow-brick-road-tour/][B]Click_Me[/B][/URL]]
[LIST]
[*]For more info: [[url=https://mackie.com/en/products/controllers/mcu-pro-and-xt-pro/mcu_pro.html][B]Click_Me[/B][/URL]]
[/LIST]
Hope this helps?
[/size]

Okay thanks a bunch!

You could check this out [URL]https://www.youtube.com/watch?v=ZJgAs-53U5A[/URL] I personally find it's much easier just to use the computer keyboard as the the alternatives are just too much mucking around.

The older behringer bcf/bcr 2000 work. I believe the newer Behringer X-touch controllers also are useable. I have used a Bcf2000 on occasion, but have not used an x-touch and therefore cannot say for certain.

Hello everyone. I have been having a great time working with SAC but I have one little challenge, its very little but I'll state it. Working with SAC I find I from time to time do miss having knobs to control channel strip (Eq and Dynamics), so my question is, is there any control surface for which a template exists in sac that allows control of the channel strip? Thanks in anticipation of your responses.